Let the Hexcrawl Addiction Begin

I am really intrigued by the concept of Hexcrawls. I've never done this before, but the OSR community does not disappoint. 

Within minutes, Goblin’s Henchman pointed me to their In the Heart of the Unknown - Procedural Hex Crawling Engine Product: 

In the Heart of the Unknown - Procedural Hex Crawling Engine In the Heart of the Unknown - Procedural Hex Crawling Engine

I don't know what it is about art for Hexcrawls, but I love it. Click the link and check out In the Heart of Unknown. It's very cool. 

So I took a closer look at Third Kingdom Games and found a whole series of products. Of course, being a little daunted by the whole Hexcrawl experience, I needed the basics. I downloaded Third Kingdom Games, which I mentioned in my last post.  

Hexcrawl Basics Hexcrawl Basics

They also have map packs for Hexcrawls, which gives me a point of reference to get me started on this whole new way of gaming. 

 

Lake of Abomination Map Packet Lake of Abomination Map Packet

I could spend weeks pouring over the stuff produced by Third Kingdom Games and Goblin’s Henchman. And probably will. 

When I created my Map Pack, I should have known I was going down this path. This is a very boring template for hexes, with 3 different colors of hex in three styles. It's also has a commercial license. So, please grab a copy and use it for for your hexcrawl or your product. 

The Hex Pack The Hex Pack

Since I am looking to provide tools for you, I do have a walk thru so you can create your own DriveThruRPG links with HTML. Give that a try, if you like. 

Hexcrawling

 I started a new project called Miledown, a hex crawl adventure. 

It just came to me as art, translating it to an adventure is going to be a trick. I can't think of the last time I used a hex map for my players and wonder if I have ever really ran a hexcrawl at all. When I ran the kids through B2, that map is a grid. Not a hexcrawl at all. 

That's ok. DriveThruRPG is to the rescue. Why reinvent the wheel when someone is an expert wheel maker? I picked up Todd Leback's Hexcrawl Basics. Before this project I had been eyeing the book simply for the cover art. I love it. 

I guess if I am going to use this for ideation, I had better do a review. It's all printed out and ready to read. I can't wait. 

Check back soon for that review and progress on my own hexcrawl project. 

The Tek - November 2020

My stats for DriveThruRPG were lack luster. I really need to remaster these or do something new. 

 AD&D Character Sheet For Use with Unearthed Arcana: 5

 Compass Rose Inn Minisetting: 0

 Kobold's Folly: 0

 Swashbuckler Character Class for D&D and AD&D: 0

 These Old Games Presents: The Hex Pack: 0

 Zero to Hero: Uncommon Commoners: 4

My spending on DriveThruRPG was up a bit this month. I have also incured a lot of cost by upgrading my computer's memory and purchasing a new Kindle Fire. I hope to offer my DriveThruRPG books as both epub and PDF, so this may pay off. As it stands, I'm about $110 in the hole right now. 

Webstats are continuing to trend upwards. You can really see the mid-month slump I fall into. Sessions are down while pageviews are up. Users seem to be hanging around longer each visit. That's great news!

Google Analytics Pageviews - 1,348

Google Analytics Sessions - 686

Pageviews per Session - 1.9657

Amazon ads revenue has fallen off and was easily overtaken by DriveThruRPG ad revenue. That's ok. 

AT-ST and Snowspeeder in 144 scale Part 2

 Today, I started my Snowspeeder. 

I'm down to just 3 sprues of parts and one is just the base. 

Again, the parts come off very cleanly. On these three parts, I needed to use an arced motion along the wings to remove the extra plastic from the clipping. 

The third part is the engine on the top of the image. It is slight recessed into the body and sticks out. I found it was easier to place it in the top half and use a dot of glue to stick it in place. 

And I made my first mistake. I miss a tiny bit of plastic when cleaning up the clip points. You can see that it is now keeping the wings from meshing together completely. I couldn't see that without some really bright light. 

I was able to fix it by running a razor along the seam and cut it off. In the next picture you can see that seam is better but not perfect. 

And this is what it looks like from top down. 

Next comes the canopy and the root of the the gun pods plus a good way to confuse yourself. In the picture below, I have the roots of the gun pods swapped. 

By flipping the pieces, everything becomes obvious. 

In the last image, you'll note some recesses in the model. That will catch spillover from the gluing. It's a nice touch on these models. 

The next part is the gun and barrel. The thin barrel made me nervous, so I cut a chunk of sprue off with it and trimmed it off with a razor. 

The barrel has a C shaped part on the end to connect with the gun. If you don't align this part correctly, the barrel will look zig-zagged. 

Now, the gun rests against the previously attached root section. If you're brave, you can put a dot of glue there. It isn't necessary as the gun itself has a two point, box shaped connector. It won't flex or go out of skew. 

I think this image shows the connection between the gun and barrel better than the last one. 

Of course, no Snowspeeder would be complete without the tow cable gun. This part is even smaller than the main gun barrels, so I took a piece of the sprue with it and trimmed it up with a razor. 

And for scale, here we have both models. 

No flyer would be complete without a base. This is another item I didn't glue together. The connections are very sturdy and the base has 3 different slots for positioning. There is a ball pivot on the top. Glue would remove the adjustable nature of the base. 

I wanted to show the the different slots on the base. 3 different positions. 

And one final image of these guys together. This one captures all of the fine detail on these two tiny models. 

Tomorrow, I'll start painting. I can't wait to work on the A-Wings I have.

City of Nexus Map Bundle Review

Title: City of Nexus
Author: Seafoot Games  (Luke Seefuss and Rianna Stahl)
Rule Set: Any
Year: 2019
Pages: 5 pdfs, 15 pages each, plus 15 .jpg images. 
Rating: ★★★★★

Since this pandemic thing kicked off, I've been looking at Seafoot Games' City of Nexus bundle. It's been on the hot list for most, if not all of 2020. 

These sort of products give me fits for reviewing. How do I show an image without giving the milk away for free? Well, I'm gonna do my best by showing part of the title page of one of the five books included with set. 

It's impressive. Imagine this image with 300 px detail and multiply by five products. 

The books are nicely designed, with several pages dedicated to the Artist's Patreon following. The next ten pages include a 8.5" by 11" overview map, with nine pages dedicate to sections of the map. In this format, I advise printing one sided pages on photo paper. Every image has a grid for your figures, tokens or models. It's is wonderful with the right paper.

But I suspect that was not what the artist intended you to do. Each of the five maps has 3 jpeg files in 300px, 72px and one 300px poster size. The first two are perfect for virtual table tops and the choice of resolution is there to meet your needs. Sometimes, you don't want to pull up a massive file. 

These maps are battlemats for you to populate. They are extraordinarily detailed with beautiful set pieces, all obviously designed for each map in question. You could either ignore them or write them into your game. The set is ruleset agnostic for ease of use in any type of campaign. They are obviously medieval looking, but that's what 99% of OSR use. 

Back to "massive". The last jpeg for each map is a mighty poster 33" by 23" with a nice white border. It's perfect for framing as art OR to print off and cover with glass for your physical tabletop. Did I mention you get 5 of them? 

The price is great. It's CyberModay today, so I am not sure if there is a sale on right now, but at triple the price this is an excellent set. An easy 5 star product. 

Click the link to order. 

Hottest New Book City of Nexus | 20x30 Battlemaps [BUNDLE]