I might have made a mistake. I logged into Kickstarter to back a project only to realize that I had already backed this project at a much higher level than I would have done today.
I managed to complete 3 more Locusts, plus three other mechs. They need some sprucing up, I expected the colors to be brighter.
As you can see, I use wine corks and sticky tack to mount them.
Well, it seemed pretty simple until it wasn't. I was going to cut the lids from 3 mm thick wood but I accidentally bought a 5 mm sheet of birch project board.
I did a trial run and it seemed fine. Except I cut a rectangular piece, not circles. I didn't think about what I was asking the laser to do. I used a caliper to measure the interior and exterior dimensions. These are Oui Yorgurt jars. Here are the measurements:
Interior dimensions: 55.700 mm
Exterior dimensions: 69.000 mm
This means the laser has to dump 22 watts of power into a pin-prick area and move on. When you are cutting straight lines, the laser moves at a predetermined speed dumping its power into the target. The beam can smoothly slice through wood.
That is different from firing full power for a brief moment and moving a large distance before repeating. The energy is discontinuous. It took hours of repeated tries to cut circles. Eventually, it worked but I'll never do that again.
I meant to burn a series of dice images onto the lids. Recently purchased some .svg files on Esty, so I thought this would be easy.
No. Either I didn't like the images or the license on the image was objectable, most not extending the right to put the image on a physical object or otherwise modifying it.
I suddenly landed a new project. Make a package of dice images specifically for various projects, from digital products to physical goods. On the left is a sample image. I suspect I will be doing blank dice and numbered dice, both black on white and white on black. These would be .svg files so they are easy to modify. For completeness, I would make a set of .tifs and .xcf files with a transparent background.
And my drive for completeness makes this project "epic scale". I need 6 images of blank dice, 60 images of numbered dice. I can double that for black on white and white on black. I can double that again for the .xcf and .tif files. More if I want to have .png and .jpg.
Hell. I will probably break this into three different files. The Friends and Family Pack would be 12 .png images priced at PWYW and would be the hardest to modify. The Dev Pack at $7.99 would be blank dice in positive and negative for the user to create stuff from there. That is 12 images in 4-6 file types. The Complete Set of Dice would contain hundreds of files owing to the numbering and would be $24.99. As time permits, I will be completing and loading these to Ko-Fi and DriveThruRPG.
The licensing would be really friendly for each. If you use them for a blog or digital product, an attribution someplace therein would be required. If you modify the files into something else, say colorize or make them part of a completely different image, then attribution is optional. Placing images on a physical object like a coffee mug, map, or t-shirt requires no attribution. The big hangup is the license does not permit the use of the files to make another clip art package. I don't care if you sell 10,000 books, T-shirts, and coffee mugs using the images, I just don't want someone reselling them in a new clip art package, modified or not.
In other news, my son spotted a piece of artwork on ESTY that he wanted burned onto a plaque. Ah, another rabbit hole.
BUT the file has the exact license I want. In fact, the creator asks people to post images of their products made with the image. That is exactly what I want to do with my dice images.
This is an image of a KC-135 refueler. My son wants it flipped the other way around. The completist in me knows there is only one main door on the left side, so I have to modify this file for accuracy because there isn't a door on the right side. Also the little curved panel under and slightly behind the cockpit is also not visible on the opposite side.
And that rabbit hole will continue throughout the next few weeks. Tomorrow's post will be about the 6 mechs I got painted.
2 pounds of chicken breasts, whole
1.5 lbs of baby yellow potatoes
1 lb of matchstick carrots
1 lb of peas, frozen
1 lb of corn, frozen
2 stalks of celery, chopped
1 onion, chopped
2 cloves of garlic, crushed
16 oz of chicken stock
3 chicken bouillon cubes
3 vegetable bouillon cubes
1 tsp. of white pepper
Salt to taste
Line the bottom of the crockpot with your chicken. I layer the carrots, onion, corn, and celery on top. I add the bouillon cubes, garlic, salt, and pepper next. The chicken stock is poured over everything, covering them, and setting the crockpot high.
Cook for 4 hours then add the corn and turn it down to low. Cook for 2-3 more hours. With an hour to go, add the frozen peas. I shread the chicken at this point and give everything a good stir.
This is a good time to start the noodles. I use extra wide egg noodles. I cook them separately because they simply won't fit in my crockpot. I ladle them out into bowls and put the mock chicken soup over them.
The party should have obtained the sword easily. The trouble would come when they returned it and people started making claims to it. The characters would become the protectors of the sword and ultimately kingmakers.
The gist of the situation was that the party got lost because they didn't follow the road to the town where the sword was. Lost, they saw the proper town in the distance but believed it was a different town. Somehow, they also missed finding a road to both towns by just a few hundred feet.
Goddamn it.
The party set up camp for the third night in a row, just out of sight of the road. I decided to throw a double whammy at them. First, I threw a storm down on them to force them out of the streambed and towards the road. That didn't work, the party made a series of herculean efforts to secure their campsite.
The second whammy was a group of bears. Lots of them. Somehow, the party won surprise over the bears, in the dark, in a storm, and fled to the road.
Finally, Victory!
No.
One of the characters cast Speak with Animals, rolled a very positive reaction and struck up a conversation with the bears instead of fighting them. Rule One of RPGs should be "Random and Railroading are immiscible."
Here is how the conversation went. The bears were attracted by the party's pitiful fire, they wanted it. There was a negotiation for "the fire starter". The party was confused but agreed thinking they were giving the bears a bit of flint and steel.
The bears wanted and took the person who made the fire, "The Firestarter*" was taken back to their cave. The whole party follows and piles into the bear cave all warm and cosy and lets me stew with a bunch of failed plans.
Sometimes, you have to throw in the towel and decide what you are doing is simply not viable. I made a snap decision to let the bears join their mission and go directly to the Army to plead their case for the town. On the way they obtained horses. It was an impressive display of power, a party of mounted magic using characters guarded by bears.
In retrospect, this was way more impressive than a sword, even a magical one.
The party still got to become kingmakers even though the general of the army obtained the sword. Since the sword was far less impressive than a band of bear-clan warriors, it didn't help him much. He remained the general of the army, but the army wanted the support of the Bear-Clan* alongside the general. And if the Bear-Clan* said go save the town, then dammit, that was what the army was going to do.
This occurs a lot in history, where an army follows a general but the general follows the will of the average soldier. It is weird, but true to life. Great generals don't railroad the troops.
*Notice that "fire starter" and "bear" suddenly got capitals. This isn't a typo. I tried to make the new capitalization of the words audible and largely it worked on this party.
